About APC Back-UPS 950VA, 230V, AVR, IEC Sockets BX950UI
BX950UI Features
Key Features
480W – 1m
Max. Capacity Used – 100%
Output power capacity
480Watts / 950VA
Output Connections
(1) IEC Jumpers (Battery Backup)
(6) IEC 320 C13 (Battery Backup)
Nominal Output Voltage – 230V
Nominal Input Voltage – 230V
Input Connections – IEC-320 C14
Cord Length – 1.22meters
Maximum Input Current – 4.0A
APC Back-UPS 950VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes: User Manual
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
A periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Telephone data line surge protection
Provides protection of connected equipment from power surges traveling on telephone lines.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Marketing features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Availability
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test
A periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Protection
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge-protected outlets
Back up and protect your hardware and data during power outages, surges, and spikes.
Output
Max Configurable Power (Watts)
480Watts / 950VA
Output Frequency (sync to mains)
50/60 Hz +/-1 Hz
Output Frequency (not synced)
50/60 Hz +/-1 Hz
Topology
Line Interactive
Waveform type
Stepped approximation to a sinewave
Transfer Time
8ms typical: 10 ms maximum
Input
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations
150 – 280 V
Number of Power Cords 1
Batteries & Runtime
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
Included Battery Modules 1
Typical recharge time
8hour(s)
Expected Battery Life (years) – 2 – 5
Battery Volt-Amp-Hour Capacity – 76
Communications & Management
Interface Port(s) – USB
Control panel
LED status display with On Line: On Battery: Replace Battery and Overload indicators
Audible Alarm
Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
273Joules
Data Line Protection
RJ-11 Modem/Fax protection
Physical
Maximum Height
215MM, 21.5CM
Maximum Width
130MM, 13.0CM
Maximum Depth
336MM, 33.6CM
Net Weight
8.0KG
Shipping weight
8.99KG
Shipping Height
295MM, 29.5CM
Shipping Width
245MM, 24.5CM
Shipping Depth
440MM, 44.0CM
Color
Black
Environmental
Operating Temperature
0 – 40 °C
Operating Relative Humidity
0 – 95 (non-condensing) %
Operating Elevation
0-3000meters
Storage Temperature
-15 – 45 °C
Storage Relative Humidity
0 – 95 (non-condensing)
Storage Elevation
0-9000meters
Audible noise at 1 meter from surface of the unit
45.0dBA