Apc Smart-Ups Srt 10000va 230v Srt10kxli

Output power capacity    10.0kWatts / 10.0kVA

Nominal Output Voltage    230V

Output Voltage Distortion    Less than 2%

Output Frequency (sync to mains)       50/60Hz +/- 3 Hz

Load Crest Factor     3: 1

Topology      Double Conversion Online

Waveform type     Sine wave

Bypass      Internal Bypass (Automatic and Manual)

Nominal Input Voltage   230V, 400V 3PH

Input frequency       40 – 70 Hz (auto sensing)

Input voltage range for main operations     160 – 275V

Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof

Typical recharge time      1.5hour(s)

Nominal Battery Voltage    +/-192 V (split battery referenced to neutral)

Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB

Control panel    Multi-function LCD status and control console

Audible Alarm     Audible and visible alarms prioritized by severity

Emergency Power Off (EPO)     Yes

Surge energy rating     480Joules

1 Year Warranty

APC Smart-UPS SRT

10/100 BaseT Connection

Connect the device to a network using a 10 or 100 BaseT connection

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Green mode

The patent-pending operating mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters, and alarms.

Availability

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime

Allows additional run time to be quickly added as needed.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Manageability

LED status indicators

Quickly understand unit and power status with visual indicators.

Network manageable

Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

SmartSlot

Customize UPS capabilities with management cards.

Serial connectivity

Provides management of the UPS via a serial port.

Adaptability

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Serviceability

Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Audible alarms

Provides notification of changing utility power and UPS power conditions