Dial Gauge Test Indicator Metric High Precision With Dovetail Rail 0-40-0 0.01mm
Fowler inch/metric dial test indicator with the yellow face is designed to measure surface variations in narrow or recessed areas 0-0.8mm measuring range, 0.0005"/0.01mm graduations, 0-40-0 balanced inch readings, and 0.001mm balanced metric readings
Auto-reversing contact point and adjustable bezel
Three dovetail mounts for mounting indicator from the top, back, or front
One-piece housing with satin chrome finish provides durability
This dial test indicator is designed for taking measurements in machining, layout, and inspection work. The dial has microfine black graduations for 0-40-0 balanced inch readings and red graduations for 0.001mm balanced metric readings. A movement and an auto-reversing contact point provide smooth action. A knurled bezel rotates 360 degrees to zero the reading at any location. Three dovetail mounts on the top, back, and front of the indicator provide a range of mounting options. The one-piece housing and satin chrome finish provides durability.
This dial test indicator includes one 3/8" and one 5/32" dovetail clamp and a molded case. Dial readings with three digits,0-40-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.
Face 1-1/4" diameter yellow face Dial type and reading 0-40-0 balanced inch and 0-.25-0 balanced metric readings Range 0-0.8mm Graduations 0.0005"/0.01mm,Contact point length 1/2" Dovetail clamps 3/8" and 5/32" Mounting type Dovetail